Unite AP4 Access Point

4 Channel Access Point
  • 8 Access Points for up to 32 channels
  • Very high operating range
  • Digital Dante® interfaces (4 in / 4 out) including PoE power supply
  • Ethernet interfaces (network)
  • 4 analogue inputs and outputs (Phoenix®)

MUlti-channel
Transmission

The Unite AP4 Access Point is a multi-functional device that can be used for a variety of different applications. 4 audio channels are available on one single Unite Access Point. A network of up to 8 Unite Access Points with a total of 32 audio channels can be established through synchronisation. The individual devices work either as transmitters or receivers depending upon the application and corresponding configuration via the Unite Manager software.



Transmission

The Unite AP4 transmits the audio signals of an external audio source with up to four DECT channels. Typical applications include interpreting assignments in conjunction with an interpreting system as well as assistive listening.​​​​​​​


Reception

As a receiver, a Unite Access Point can establish up to 4 bi-directional point-2-point connections to Unite transmitters. These 4 microphone signals can then be played from the Unite Access Point via Dante or analogue. These can also be sent to a second Unite Access Point via Dante or analogue, which can then be configured as a transmitter to send up to 4 DECT channels.

Downloads


Architect's Specifications

beyerdynamic-Architects-Specifications-2018-03.zip (1.95 MB)


Manual

MAN_Unite-AP4_EN-DE_A2_.pdf (3.01 MB)


Spec Sheet

DAT_Unite-AP4_EN_.pdf (2.46 MB)


More Downloads

In the service area