Click here to see all results
 
DT 291 PV MK II LTD, with limiter (99 dB), 80 ohms, for phantom power
 

DT 291 PV MK II LTD, with limiter (99 dB), 80 ohms, for phantom power

Made in Germany
Available at authorized resellers
Article Number: 488615

Headset with condenser microphone (omnidrectional) for commentators and studio applications (film scoring) - (with limiter).

Here you can find more information about the beyerdynamic limiter concept.

The headsets in this series dispose of a dynamic headphone transducer with a frequency response of 10 – 30,000 Hz and excellent isolation from ambient noise. The single cable is detachable, the ear cushions are replaceable. The pivoting gooseneck microphone- boom design, can be swivelled to work on the left or right side of the headset, or set to the upper position when not in use.

â–² NEW - Improvement of immunity against RFI (Radio Frequency Interference) caused by GSM, DECT, UMTS, Tetra etc.
â–² Good ambient noise attenuation
â–² Omnidirectional electret condenser microphone
â–² Very high speech reproduction quality and excellent intelligibility
â–² NEW - Flexible, pivotable gooseneck for optimal positioning
â–² Lightweight, low profile design
â–² Single-sided, detachable cable
â–² NEW - Limiter
â–² Powerful neodymium headphone system for excellent reproduction accuracy
â–² Optimised frequency response according to IRT (Institute for Radiotechnology in Munich) regulations
â–² Balanced sound impression
â–² Closed headphone
â–² Circumaural ear pads, advanced ear cushion system
â–² Adjustable, soft padded headband
â–² Service-friendly construction due to exchangeablitity of all parts

All DT 291 versions are supplied without connecting cable. Please order the appropriate cable separately (see accessories).

Contact

beyerdynamic GmbH & Co. KG
Theresienstr. 8
74072 Heilbronn - Germany

Questions regarding Orders, Payment & Delivery

Phone: +49 7131 617-444

Product Advice

Phone: +49 7131 617-440

Or contact us per e-mail!
proaudio @beyerdynamic .com

technical data

Transmission type   Wired
Headphone design (operating principle)   Closed
Headphone impedanceAlso known as nominal impedance. The impedance is the AC resistance of the coils of loudspeakers and headphones in ohms. Since impedance depends on the frequency, it is always specified at a frequency of one kilohertz.   80 ohms
Headphone frequency responseThe frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones.   10 - 30.000 Hz
Nominal sound pressure levelThe acoustical level, the headphone transducer produces to an artificial ear (a measurement device, which simulates a human ear) with an input power of 1 mW (dB/mW @ 500 Hz).   100 dB SPL
Polar patternThe polar pattern is the preferred pick-up direction of the microphone. According to the shape of the corresponding measurement plot, there are omni-directional, cardioid, super-cardioid or hyper-cardioid as well as figure-of-eight patterns. for microphone   Omnidirectional
Transducer typeThe transducer system is designed as a dynamic moving coil microphone, as a ribbon microphone or as a condenser microphone. for microphone   Condenser - Omni
ConstructionSound coupling to the ear. A differentiation is made between supraaural headphones, circumaural headphones and in-ear headphones.   Circumaural (around the ear)
Cable & plug   Detachable cable – various connectors available
Net weight without packaging   265 g


Spec Sheet

accessories for DT 291 PV MK II LTD, with limiter (99 dB), 80 ohms, for phantom power

K 190.00 - 3 m
K 190.00 - 3 m
€35.00
Incl. 19% tax, Excl. shipping
Connecting cable for DT 190- and DT 200-series HEADSETS with free ends
K 190.00 - 3 m
K 190.40 - 3,0 m
K 190.40 - 3,0 m

Connecting cable for DT 190- and DT 290 series with 3 pin XLR male and 6,35mm jack plug: K 190.40

K 190.40 - 3,0 m
WS 30 WS
WS 30 WS
Wind screen for TG-X 30/ DT 281/ 291, white
WS 30 WS
WS 30 SW
WS 30 SW
Wind screen for TG-X 30/ DT 281/ 291, black
WS 30 SW
K 190.00 - 1.5 m
K 190.00 - 1.5 m
Connecting cable for DT 190 and DT 200 series HEADSETS with free ends
K 190.00 - 1.5 m
WK 190.00
WK 190.00
Coiled connecting cable for DT 190 and DT 290 series with free ends
WK 190.00
DT-Bag, nylon
DT-Bag, nylon
Nylon transport bag for professional headphones and headsets.
DT-Bag, nylon
K 190.40 - 1,5 m
K 190.40 - 1,5 m

Connecting cable for DT 190- and 290 series with 3 pin XLR male and 6,35mm jack plug: K 190.40 - 1.5 m

K 190.40 - 1,5 m
 

Find distributors

Country
ZIP